Shop

Second-hand reconditioned single wire saw with the rotating trolley (manual). It's perfect for squaring granite and marble blocks. This wiresaw machine has been fully reconditioned in our workshop. The refurbishing of a wire saw includes: Dismantling Sandblasting Repainting with e...

N° 1: Spindle calibrator equipped with height and depth adjustment for application of abrasive tools N° cleaning spindle: 1 N° frontal spindles: 8 N° bevelling spindles: 4 (2 upper – 2 lower) N° 1: Spindle for upper groove, calibrating, bevelling of the edges, inclined cut

N° plates: 8 Plates’ Area: 630 x 630 mm This machine is complete with: N ° 1: Pemo 503 filter press feeding pump with inverter N° 1: Mud homogenization tank

This machine includes 3 rails.

Max blade diameter: 625 mm Tilting head:  0° – 45° for inclined cut Rotating head: 0° – 360° Tilting table

Total capacity: 220 lt This machine has been reconditioned on November 2019 by the seller.

Power: 41 kW (55 CV)

Technical Specifications: Max. cutting width: 415 mm Max. cutting thickness: 30 mm Max. blade diameter: 300 mm Overall dimension: 300 x 150 x h 185 cm Weight: 2500 Kg

Fully reconditioned small saw for marble and granite cutting. The saw has a fixed table and a fixed bridge. It comes with a 10 HP blade motor and you can install a blade with diameter 400 mm (16 "). The machine has been fully reconditioned and has a new electrical panel and new motors. Te...

Useful capacity: 560 L Load width: 440 mm Inside height: 455 mm Total power: 5,5 kW Timer with automatic stop Overall dimension: 1.700 x 1.750 x h. 1.100 mm

A very versatile machine, easy to use and suitable for cutting marble, stones, and granite. The movement of the up/down disc holder and the transversal movement are motorized. Technical Specifications: Track in oil bath dimension: 5500 mm Bench dimension: 2500 mm Max blade diameter: ...

Technical characteristics of the bush-hammering machine: Semi-automatic carriage with tilting table, rails and slab holder at loading Roller conveyor with free rolls: 2000 x 2300 mm (width x length) Rotating bush-hammering head equipped with n° 5 hammers Ø16 mm with motorized conveyor...

This stock of valves comes from bankruptcy factories. Each valve if already used can be also reconditioned. Our reconditioning includes: Replacement of the sleeve (in rubber or natural rubber "caucciù") Replacement of air gaskets Sandblasting and painting Testing Valves are a...

Possibility to tilt to 90°. The spindle is arranged to be equipped with shaped wheels to rough irregular profiles. Spindle for lower / upper groove. Extendible bar to support pieces of big dimensions. Extendible bar to support pieces of big dimensions. N° 2: Automatic pre-cutting...

Used edge polisher single-head Zambon LTM-3200 Fix bench edge polishing Flat and round profiles Automatic tool changer Tool change magazine with 6 positions Working thickness: 20 to 80 mm Length of working: 3200 mm Diameter of the wheels: 130 mm

Belt edge polishing Flat and round profiles Frontal spindles: 6 Bevelling spindles: 2 Series of spindles for the edge Spindle for lower / upper groove Extendible bar to support pieces of big dimensions Rollers for material loading/unloading Dimensions: 570 x 230 x 220 c...

Edge polisher fully reconditioned for flat and round edges. Technical Specifications: N° 1 Calibrator N° 2 Chamfers at the input (lower and upper) N° 8 Polishing heads (1 diamond) N° 2+2 Chamfers at the exit (lower and upper) N°1 Blade for drip Dimensions: 5.550 mm x 1....

Used hydraulic Cylinder dismounted from fork lift Total lenght: 5,20 mt Stroke: 4,70 mt Cane diameter : 380 mm Stem diameter: 255 mm

Used reconditioned tensioner Spadoni for marble gangsaw # Pistons: 86 Diameter pistons: 35 mm Total length: 190 cm Useful length: 174 cm

6HP with capacity of towing 7 ton on trolley. Used also for civil works, industrial and naval purposes needed to tow the loads onto horizontal or inclined floors.

Manufacturers: PEMO, Perissinotto, Caprari and AIR Vertical and horizontal pumps used and reconditioned. PEMO pump 60 Impeller 300 iron, 9Hp, 1400 rpm PEMO pump 60 Impeller 300 rubber, 9Hp, 1400-2800 rpm PEMO pump 60 Impeller 230 rubber PEMO pump 80 Impeller 400 in gomma PEMO pump 1...

used reconditioned Reduction gears COMES RA99 2 inputs with bearings Reduction gears COMES RA99 1 input Reduction gears Bonfiglioli 2FA 2 inputs Reduction gears Bonfiglioli 1FA 1 input Housings COMES Housings Bonfiglioli

Model: Connecting rod – Gangsaw: Frugoli – Conditions: refurbished

3 units available; Reconditioned Vacuum Lifter with 1 suction cup for marble/stone slabs Dal Forno VAPOM 2050/AC Capacity: 250 Kg N° pads: 1 Pads area: 50x20 cm Spare parts replaced with new ones: slide valve with button venturimeter complete with silencer compressed...

Model: Connecting rod, included bearings – Gangsaw: Gaspari JS350

Marchetti tensioner units for granite gangsaws. The price depends on the useful cut size of the machine. Available also Marchetti power unit. N. pistons: 24/module Note: new bellows and rings Marchetti For Officine Marchetti original spare parts visit our e-shop page: Marchetti tensioner par...

Reconditioned Tumbling machine LT600 with new tank Capacity: 600 L Hole 46 cm Diam. 170 cm Motor with warranty We have several reconditioned tumbling machines up to 100 liters of capacity. Year of construction from 2005 to 2014. Contact us for a specific request

Max capacity with stabilizers: 25000 Kg; Max capacity in wheels in movement: 10.000 Kg. Max height: 32 m; 4 X 4 wheel drive with gearbox; Tyres model: 16.00 R25 The capacity of the mobile crane is 25 Ton on stabilizers. When the mobile crane is moving on wheels (so without st...

N° 8: Frontal spindles N° 2: Bevelling spindles (1 upper – 1 lower) N° 1: Spindle for lower N° 1: Spindle for upper groove Max working thickness: 80 mm The machine has been completely reconditioned.

Calibrators: #1 Polishing heads: #8 Useful width: 450 mm The machine has been completely reconditioned in our workshop. 

This is a cross cutter reconditioned and in full working conditions. Useful working width: 500 cm Useful working height (slab thickness): 8 cm You can use blades of diameter 400 mm If you need to buy blade for cross cutter machine you can visit our website Amastone.com Diamant ...

The bridge saw is equipped with a 20 hp motor regulated by an inverter. A PLC allows to make multiple cuts with 9 repeatable measurements 99 times each. The machine has been completely reconditioned. Bellows, covers slides, rack and pinions have been replaced with new spare parts.

N° calibrators: 1 N° frontal spindles: 8 N° bevelling spindles: 4 Spindle for lower/upper groove. Rollers for material loading/unloading. Extendible bar to support bigger pieces. The machine has been reconditioned and painted.

Max blade diameter: 625 mm Axis Stroke “X”: 3650 mm Axis Stroke “Y” : 1660 mm Axis Stroke “Z”: 400 mm Rotating head:  0°-90° Tilting blade: 0°-90° Useful length: 3600 mm Useful width: 1600 mm Useful height: 200 mm Max cutting depth (with blade �...

Type: Diamond Fickert Heads 4 available.

N° Plates: 10 Plates Area: 800×800 mm The price of this machine includes: N° 1: Filter press N° 1: Mud preparation tank N° 1: Filter press feeding pump N° 1: Automatic control unit for flocculant

Axis Stroke “X”: 3.500 mm Axis Stroke “Y”: 1.800 mm Axis Stroke “Z”: 250 mm Max blade diameter: 500 mm Min blade diameter: 350 mm Bench dimension: 3.500 x 1.750 mm Tilting head: 0° - 50° Rotating head:  0° - 90° Manual rotating and tilting head ...

N° calibrators: 1 N° frontal spindles: 10 N° bevelling spindles: 4 (2 upper - 2 lower) N° spindle for upper groove: 1 N° spindle for lower groove: 1 Extendible bar to support bigger pieces. N° 2 rollers (2m) for material loading/unloading. Machine without floating (o...

Front spindles : 7 Bevelling spindles: 2+2 Disc grooving: Hp 5,5 Calibrator wheel: Hp 5,5 Cutting unit: Hp 5,5 Feeding: from left to right

Useful width: 80 cm without calibrator Useful width: 60 cm with calibrator