Sold

Max capacity: 25000 Kg

Total capacity: 220 lt This machine has been reconditioned on November 2019 by the seller.

Useful capacity: 560 L Load width: 440 mm Inside height: 455 mm Total power: 5,5 kW Timer with automatic stop Overall dimension: 1.700 x 1.750 x h. 1.100 mm

Working hours: 13.692 Power supply: Diesel

For more information, please go to Amastone.com - 3 Axes CNC router machine N. axes: 3 Axis Stroke “X”: 950 mm Axis Stroke “Y” : 1400 mm Axis Stroke “Z”: 260 mm Bench dimension: 1200 x 1500 mm Spindle power: Saccardo 2,6 Kw (S6) - 2,2 Kw (S1). Predisposition fo...

N° 1 calibrators N° 2 opposed spindles inclined at 45° N° 6 oscillating polishing spindles N° 2 chamfering heads

Blade diameter from 450 mm to 700 mm 360° turning bench Dimension bench: 3.200 x 2.000 mm Axis Stroke “X”: 3.500 mm Axis Stroke “Y”: 3.500 mm

Max capacity: 4.000 Kg Length: 14,80 m Type: single girder Documents available

Features first overhead crane: Max capacity: 5.000 Kg Length: 15.50 m Year: 2004 Type: double girder Documents available Features second overhead crane: Max capacity: 5.000 Kg Length: 17.50 m Year: 2004 Type: double girder Documents available

Max capacity: 10.000 Kg Length: 13.95 m Type: double girder Max capacity: 20.000 Kg Length: 14.05 m Type: double girder

Max capacity: 20.000 Kg Length: 15.30 m IP protection: IP 55

Max capacity: 1000 kg Height: 3,8 m Arm length: 6 m Type: with pillar (column crane)

Technical characteristics of the bush-hammering machine: Semi-automatic carriage with tilting table, rails and slab holder at loading Roller conveyor with free rolls: 2000 x 2300 mm (width x length) Rotating bush-hammering head equipped with n° 5 hammers Ø16 mm with motorized conveyor...

Max capacity: 30000 Kg Forks length dimensions: 2500 mm Crane step: 4500 mm

Max capacity: 27000 Kg Forks length dimensions: 2500 mm Crane step: 4550 mm

Max capacity: 35800 Kg Forks length dimensions: 2250 mm Crane step: 5715 mm

Max capacity: 25000 Kg Forks length dimensions: 2500 mm Crane step: 4400 mm

Working size: 3.500 mm Spindle power: 2.2 kW RPM: 1.400/2.800 Working thickness for round edges from 2 to 15 cm Round edges: Bull nose, quarter bull nose, half bull nose, double bevel, straight edge and automatic special profile Working thickness for flat edges from ...

Second-hand Tecnocut waterjet in very good conditions. The machine is still installed and it's possible to plan a visit for inspection and see it working. Pump Power: 400V/50Hz - 45 kW Waterjet overall dimensions: 550 x 230 cm Pump dimensions: 110 x 150 cm Operator panel dimension: ...

Edge polisher fully reconditioned for flat and round edges. Technical Specifications: N° 1 Calibrator N° 2 Chamfers at the input (lower and upper) N° 8 Polishing heads (1 diamond) N° 2+2 Chamfers at the exit (lower and upper) N°1 Blade for drip Dimensions: 5.550 mm x 1....

The cranes are in good working condition. Winch capacity: 5 Ton  

Useful width: 400 mm Useful height: 400 mm Power: 100 Ton Machine includes a conveyor belt 4000 x 1000 mm The machine has worked only for few hours and it was left unused for most of his life. If you need blades for splitting machines visit our e-shop amastone

*Max. diamond wires: 4 Multiwire machine type: Variable Total installed power: 45 HP Useful cutting width: 3.5 m Useful cutting height: 2.1 m Speed of diamond wires from 0 to 40 m/sec Diamond wire length: 20.90 m Manual rotating table with max. capacity 40 ton * It is...

Axis Stroke “X”: 1.800 mm Axis Stroke “Y”: 3.200 mm Axis Stroke “Z”: 150 mm Power pump: 37 kW Pump KMT Abraline Weight of the machine at full load of water: 20.000 Kg

Max capacity: 6 Tons Engine: Diesel Floating arm

Used second hand forklift Toyota 5FGCU25 Capacity: 5000 lbs (2250 Kg) Working hours: 5900 h Lightly used to move crates of stone, this fork lift has very few hours as it was held mainly as a backup for a more frequently used machine. With side-shift ability and a triple mast 5.000 lb...

Used tumbling machine Kromas VM 1700 diameter: 1700 mm

is full automatic and incredibly accurate. This machine is capable of carving two pieces at once up to with length 1.700 mm, width 300 mm and deep 100 mm. Sculpting machine can be set to produce extremely precise copies that require a fast final finish.  

Useful thickness from 2 cm to 10 cm Blade: 620 mm

N° Plates: 8 Plates Area: 630×630 mm Silos dimensions: diameter 250 cm; H 680 cm

Max capacity: 16.000 Kg Length: 11.95 m Documents not available

N° 4 opposed spindles inclined at 45° (2+2) Spindle for upper groove / lower Useful thickness from 15 mm to 60 mm

Crawler   powered by a diesel engine, equipped with self-moving rail and hydraulic cylinders for quick leveling and positioning. The chain saw system is a Fantini 70 RA_BU suitable for use with marble and other very hard stones. Blade length: 3000 mm

3 units available; Reconditioned Vacuum Lifter with 1 suction cup for marble/stone slabs Dal Forno VAPOM 2050/AC Capacity: 250 Kg N° pads: 1 Pads area: 50x20 cm Spare parts replaced with new ones: slide valve with button venturimeter complete with silencer compressed...

Technical Specifications: N°1 calibrating spindles N°2 opposed spindles inclined at 45° N°1 shaping unit N°5 oscillating polishing spindles Working thickness from 10 mm to 60 mm Weight: 2.750 Kg

Used for contouring, shaping, drilling, levigating, milling and polishing granite. Full electric reconditioning. Useful length: 3000 mm Useful width: 1150 mm Vertical run: 400 mm

N° blades: 80 N° connecting rods: 2 Useful cutting size: 320 x 210 x 215 cm Type: Trolley goes up, fixed blades

Useful working height: 180 mm Splitting Machine with wire

Technical Specifications: Power: 36 Ton Useful width: 600mm Useful height: 300 mm Weight: 1.500 Kg Year: 2011